Advanced Materials & Processes

FEB 2015

Covers developments in engineering materials selection, processing, fabrication, testing/characterization, materials engineering trends, and emerging technologies, industrial and consumer applications, as well as business and management trends

Issue link: http://amp.digitaledition.asminternational.org/i/466012

Contents of this Issue

Navigation

Page 31 of 68

ItSC 2015 SChedule-at-a-glanCe The preliminary schedule included here is subject to change. ITSC conference attendees will also have access to the technical programming ofered through AeroMat 2015 and Microstructural Characterization of Aerospace Materials and Coatings Conference at no additional charge. Date Time Event Saturday, May 9 8:30 a.m. – 4:30 p.m. Education course: Introduction to Thermal Spraying (Two-day course) Sunday, May 10 8:30 a.m. – 4:30 p.m. Education course: Introduction to Thermal Spraying (Two-day course) 8:30 a.m. – 4:30 p.m. Education course: Thermal Spray Safety Management 8:30 a.m. – 4:30 p.m. Education course: Robotics for the Thermal Spray Industry and Thermal Spraying for the Oil and Gas Industry 11:00 a.m. – 12:30 p.m. ASM Thermal Spray Society – Expo Committee Meeting (invitation only) 12:30 – 6:00 p.m. ASM Thermal Spray Society – Board of Directors Meeting (invitation only) 6:00 – 8:00 p.m. Conference registration open Monday, May 11 7:00 a.m. – 6:00 p.m. Conference registration open 8:00 a.m. – 12:10 p.m. ITSC technical programming 10:00 – 10:30 a.m. Refreshment break 10:15 – 11:15 a.m. Private demo tours (ITSC and IMS) 12:00 – 7:00 p.m. Exhibit hall open 12:10 – 1:15 p.m. Lunch on show floor (included in registration) 1:30 – 3:00 p.m. Combined plenary session with ITSC/AeroMat/IMS, featuring John Grotzinger 3:00 – 3:30 p.m. Refreshment break (show floor) 3:30 – 5:30 p.m. ITSC technical programming 5:30 – 7:00 p.m. Expo welcome reception (included in registration) Tuesday, May 12 7:00 a.m. – 5:00 p.m. Conference registration open 8:00 – 11:50 a.m. ITSC technical programming 9:00 a.m. – 5:00 p.m. Exhibit hall open 10:00 – 10:30 a.m. Refreshment break (show floor) 12:00 – 1:00 p.m. Lunch on the show floor (included in registration) 1:00 – 3:30 p.m. Combined plenary session with ITSC/AeroMat/IMS, featuring Robert Vassen and Humberto Luiz de Rodrigues Pereira 3:30 – 4:00 p.m. Refreshment break (show floor) 4:00 – 5:40 p.m. ITSC technical programming 7:00 – 9:30 p.m. Networking event on Queen Mary (additional fee) Wednesday, May 13 7:30 a.m. – 5:00 p.m. Conference registration open 8:00 – 10:00 a.m. ITSC technical programming 9:00 a.m. – 4:00 p.m. Exhibit hall open 10:00 a.m. – 12:00 p.m. Cofee break, Oerlikon Metco Sulzer young professionals competition, and poster session (show floor) 12:00 – 1:00 p.m. Lunch (concessions available on the show floor) 1:00 – 4:50 p.m. ITSC technical programming 3:00 – 3:30 p.m. Refreshment break Thursday, May 14 7:30 a.m. – 12:00 p.m. Conference registration open 8:00 a.m. – 12:10 p.m. ITSC technical programming 10:00 – 10:30 a.m. Refreshment break 12:10 p.m. Conference adjourns A D V A N C E D M A T E R I A L S & P R O C E S S E S | F E B R U A R Y 2 0 1 5 2 9

Articles in this issue

Archives of this issue

view archives of Advanced Materials & Processes - FEB 2015